The height of the Go Power Transfer Switch - 30 Amp Item # 34264403 is 4-1/8 inches, the length is 8-5/8 inches, and the width is 7-3/8 inches. view full answer...
Yes, the Go Power Automatic Transfer Switch item # 34270278 will work with your 30 watt generator when you are not hooked up to shore power. Since you're running an invertor with solar you will need two of the item # 34270278. You can't run three power sources with just one.
I have linked a diagram below that will help you get set up. view full answer...
Basically you'd need a little over 10 amps of power at any given point based on the wattage of the accessories you mentioned so the 30 amp transfer switch part # 34264403 would easily work really well since it has about 3 times the amperage requirement. This would be a really solid choice that would work well so I recommend it for you! We also don't have anything lower amperage either. view full answer...
The dimensions of the Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch # PD94FR that you referenced are 11-1/4" long front to back x 6-5/8" wide from left to right x 4" tall. view full answer...
I spoke with my contact at DeeZee about the Specialty Series Truck Bed Transfer Tank, # DZ91750SB. She stated that the drain plug is 1-1/2 inches and that the cap and vent can be switched. She was also fairly certain that the drain plug would not work as a gravity feed. I have included a link to the installation details for reference. This tank should not be used to carry flammable liquid such as gasoline and it should not be used as an addition to a vehicles fuel system. view full answer...
The smallest sleeve of the Camco Gen-Turi Transfer Kit, part # CAM44881, has an inner diameter of 1.23 inches and an outer diameter of 1.34 inches. It's 1-1/2 inches long.
This is used to move the Gen-Turi RV Generator Exhaust System, part # CAM44461, to another RV. view full answer...
There are absolutely rectangle RV dome lights and you can choose between incandescent or long-lasting LED; here are the options for rectangle RV dome lights:
- Optronics RV Interior Double Dome Light with Switch - Incandescent - Rectangle - Clear Lens # RVIL22
- Omega RV Double Dome Light with Switch - Surface Mount - Incandescent - Rectangle - Clear Lens # 328-001-902XPW
- Opti-Brite LED RV Dome Light - 227 Lumens - Rectangle - White Lens # ILL36CB
- Opti-Brite LED RV Dome Light -... view full answer...
The Replacement Fan Switch for Ventline RV Range Hoods is 0.85" long x 0.594" wide x 0.9" deep (from bottom of bezel to the terminals). This replacement switch is designed to fit on Ventline S0721 Series range hoods. If you have a different range or size switch, please let me know and I can help you find a different replacement. view full answer...
The switch for the Atwood RV Water Heater # AT96117 is already mounted to the back of the water tank like what you can see in the attached picture. view full answer...
Thanks for the pictures and all the information! Since you have the Falcon 2 Tow bar you can use the Roadmaster Direct-Connect Base Plate Kit item # RM-52927-5 you were looking at and get rid of the crossbar. This kit is confirmed to fit your 2022 Subaru Crosstrek. The direct connect kits are easier to work with then the Cross-Bar style like item # RM-52927-4. Plus it is one less moving part.
The Roadmaster InvisiBrake Supplemental Braking System item # RM-8700 will work great in your... view full answer...
The IP66/206 Single RV Switch Faceplate - Black # 37214045 has inside dimensions of 7/8 inch by 1-1/2 inches. I have attached some photos to assist.
I can't find the JR 19-872 you referenced to compare fit. view full answer...
The only switches we have for Ventline Range Hoods are the Replacement Lamp Switch item # BL0108-01 and the Replacement Fan Switch item # BL0108-02. These fit the Ventline S0721 Series range hoods. The rotary knob is no longer available.
If you can't locate the correct switch I recommend replacing your range hood with the Furrion Ducted RV Range Hood with Light item # FHO23SACRBL or Furrion Ductless RV Range Hood with Light item # FHO23SACRVBL. view full answer...
The dimension of the cutout in the IP66/206 Single RV Switch Faceplate # 37214035 is 1-1/2" tall and 7/8" wide. I edited a picture to show dimensions, which I have included below. view full answer...
I reached out to the manufacturer who was able to provide me all the specs for the On/Off Push Button Switch for RV Lighting # DG52453VP (White/Gold) and # DG52452VP (Black).
I have added cut outs of the dimensional drawing for you which has the size of the switch. It is rated for up to 14 volts DC and 10 amps; the wires are 18 gauge. view full answer...
The 12V RV Ceiling Fan w/ Wall Switch - 4 Speed - 34-1/2" Diameter - Brushed Nickel - Cherry/Oak item # 344410TSDC36BNOKCY weighs 7 lbs. I have attached a review video below that goes over this fans functions. view full answer...
For the dimensions of the Replacement Lamp Switch for Ventline RV Range Hood # BL0108-01, I confirmed that the overall dimensions of the switch are .85 inches high x .594 inches wide. As far as the cutout for the hole, that dimension is .756 inches high x .508 inches wide. I went ahead and attached diagrams of these dimensions. view full answer...
The dimensions of the Rest Easy Short Queen Denver Mattress # DE29ZR are 60 inches by 75 inches by 5 inches deep.
This mattress has a core of high density foam which provides great sleep support, and a Euro top design that provides luxury as well as comfort. A nice feature of this mattress is that the all foam construction that reduces transfer of motion and roll together between sleeping partners.
I've linked a demo video on a similar mattress to show you what to expect when the mattress... view full answer...
The Replacement Clear Lens for Omega LED RV Porch Light # 328-89-319 is approximately 4-1/2" x 4-3/4" and is the direct replacement for the lens of the Omega LED RV Porch Light with Switch - 357 Lumens - Surface Mount - Clear Lens # 328-007-30SCPE.
I do recommend ensuring you have this exact porch light model as opposed to using dimensions in order to confirm the fit. I have added some links below to video reviews for you to check out as well if you'd like to take a look. view full answer...
The dimensions on the threaded mounting housing of the On/Off Push Button # DG52452VP is 7/16" in diameter. This is the smallest push button switch we have available. I've also added a photo to show these dimensions. view full answer...